The Alphacool Eiswolf GPX-Pro is the first prefilled AIO water cooler for graphics cards with an integrated pump.
Alphacool developed a completely new pump design to minimize the pump’s volume and increase performance, and the suction pump was born. Through its suction principle, less turbulence is created in the water, allowing for a more even flow. This also makes the pump nearly inaudible – a first in the AiO market.
Naturally, the cooler comes with a backplate that is directly attached to the cooler after installation, ensuring better heat transfer and distribution. This significantly improves the cooling performance. Additionally, it offers an aesthetic improvement in that the graphics card PCB is barely visible from the side. All that remains is a slight opening for the electrical connection and SLI/CrossFire Connector, of course.
The cooler is also built modularly. Should you need to buy a new graphics card, you won’t need to buy a whole new cooler as well. Only the aluminium section will need to be replaced. Alphacool offers special uprgrade kits for this, which reduces costs for your next modification. This, too, is unique in the AIO market.
The hoses and connectors are also based on standard water cooling components. The hose is encased in anti-kink springs and comes in the 11/8mm size. The connectors have standard G1/4” threads and can therefore be exchanged for any other model or size desired.
The two quick-release fasteners allow the cooler to fit easily into any cooling loop. If you are using the Alphacool Eisbaer CPU AIO water cooler, you can easily connect it with the Eiswolf GPX-Pro using the quick-release fasteners. Using the Eisbaer gives you a redundant system, as you have two pumps in the loop. In the unlikely event that one pump fails, the other can still support the cooling loop. This is security at its highest level.
Graphics card not included
- Zotac GeForce GTX 1080 Ti AMP Extreme 11GB GDDR5X (ZT-P10810C-10P)
- Zotac GeForce GTX 1080 Ti AMP 11GB GDDR5X (ZT-P10810D-10P)
- Zotac GeForce GTX 1080 Ti Arctic Storm 11GB GDDR5X (ZT-P10810E-30P)
Scope of Delivery
- 1x Alphacool Eiswolf GPX Pro - Nvidia Geforce GTX 1080Ti Pro M18 - incl. backplate
The manual can be downloaded here
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Hint:||Kompatibel bis 16/13mm gerade, Kompatibel bis 19/13mm gewinkelt|
|Hardware Modell:||GTX 1080 Ti|
Klik hier om deze vraag (en) weer te geven.
Klik hier om deze beoordelingen te bekijken.
Was mich bei Alphacool Artikeln immer wieder begeistert, sind die hochwertigen Bauteile und die sehr gute Verarbeitung. Die verzichten komplett auf minderwertige Materialien und arbeiten eigentlich immer mit 100% Kupfer. Da weiß man was man hat und das spiegelt sich meiner Meinung nach auch in der Leistung wieder. Über 45°C geht mein System eigentlich nicht mehr.
Jedem zu empfehlen!