Jouw waterkoeling- en moddingdistributeur Jouw waterkoeling- en moddingdistributeur

Alphacool Eiswolf GPX Pro - Nvidia Geforce GTX 1080 Pro M09 - incl. backplate

  • 1013444
  • 11395
  • 4250197113953
  • 1,877 kg

5 op voorraad

€ 139,99 *

Prijzen incl. btw excl. verzendkosten

The Alphacool Eiswolf GPX-Pro is the first prefilled AIO water cooler for graphics cards with...meer
Productinformatie

The Alphacool Eiswolf GPX-Pro is the first prefilled AIO water cooler for graphics cards with an integrated pump.

Alphacool developed a completely new pump design to minimize the pump’s volume and increase performance, and the suction pump was born. Through its suction principle, less turbulence is created in the water, allowing for a more even flow. This also makes the pump nearly inaudible – a first in the AiO market.

Naturally, the cooler comes with a backplate that is directly attached to the cooler after installation, ensuring better heat transfer and distribution. This significantly improves the cooling performance. Additionally, it offers an aesthetic improvement in that the graphics card PCB is barely visible from the side. All that remains is a slight opening for the electrical connection and SLI/CrossFire Connector, of course.

The cooler is also built modularly. Should you need to buy a new graphics card, you won’t need to buy a whole new cooler as well. Only the aluminium section will need to be replaced. Alphacool offers special uprgrade kits for this, which reduces costs for your next modification. This, too, is unique in the AIO market.

The hoses and connectors are also based on standard water cooling components. The hose is encased in anti-kink springs and comes in the 11/8mm size. The connectors have standard G1/4” threads and can therefore be exchanged for any other model or size desired.

The two quick-release fasteners allow the cooler to fit easily into any cooling loop. If you are using the Alphacool Eisbaer CPU AIO water cooler, you can easily connect it with the Eiswolf GPX-Pro using the quick-release fasteners. Using the Eisbaer gives you a redundant system, as you have two pumps in the loop. In the unlikely event that one pump fails, the other can still support the cooling loop. This is security at its highest level.

Graphics card not included

Compatibility

 

Scope of Delivery

  • Alphacool Eiswolf GPX Pro - Nvidia Geforce GTX 1070 M04 - with backplate

 

Eiswolf brochure

Notice:

Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.

We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.

Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.

Awards and documents
Techmische details en video's meer
Technische details
Manufacturer: Alphacool
Materiaal deksel: Kunststoff
Materiaal bodemplaat: Koper
Aansluiting: 2x G1/4
Cooler model: Komplettkühler
Hint: Kompatibel bis 16/13mm gerade, Kompatibel bis 19/13mm gewinkelt
Fabrikant: NVIDIA
Hardware Modell: GTX 1080
SLI compatibel: Ja
Videos
Questions & Answers more
Questions & Answers
Frage von Ethan R. vom 03. March 2017
I am trying to find out if this water block is compatible with the EVGA Geforce GTX 1080 CLASSIFIED (08G-P4-6386-KR) specifically. If it is, when will it be available?
Antwort von Administrator vom 03. March 2017
Please use the Alphacool waterblock finder: http://www.hwconfig.com/waterblock-finder
Frage von Erle F. vom 12. December 2017
Is it possible to just buy the aluminum cooler from this kit and pair it with a gpx solo for a custom loop?
Antwort von Administrator vom 12. December 2017
You mean an upgrade kit? In the moment we do not have some on stock. Maybe later.
Frage von Erle F. vom 12. December 2017
I ended up buying this kit to use the block/cooler in a custom loop. The loop contains two D5 pumps (for redundancy), this block/cooler, a CPU block, a 420 rad and possibly a 120 rad. With the two D5 pumps, can I reverse the inlet/outlet into the block and leave the GPX Pro pump off? Can I remove the GPX Pro pump and use the two D5 pumps exclusively...again with the inlet/outlet to the block reversed? Thanks in advance.
Antwort von Administrator vom 12. December 2017
Yes you can, but to reverse IN and Out is a bad idea. You will lose a lot of cooling power because inside the cooler you have a cooling plate with a nozzle plate. If you reverse the flow, the cooler can`t work correctly.
1 Vraag (vragen) in andere talen.
Klik hier om deze vraag (en) weer te geven.
Frage von Guest #260408 vom 12. December 2016
Welche varianten werden hier unterstützt?
Antwort von Administrator vom 12. December 2016
Leider haben wir dazu keine vollständige Liste. Sie können uns gerne einmal die Bezeichnung Ihrer Grafikkarte zukommen lassen, wir werden dann überprüfen welcher Kühler mit Ihrer Karte kompatibel ist.
heb je een vraag?
Merk op: Uw vraag zal publiekelijk zichtbaar zijn en kan worden beantwoord door een lid van onze community en door ons ondersteuningsteam. U kunt uw openbare gebruikersnaam en uw instellingen voor e-mailmeldingen in uw klantaccount bewerken.
Lees, schrijf en bediscussieer reviews...meer
Beoordelingen
5 Stars:
(0)
4 Stars:
(0)
3 Stars:
(0)
2 Stars:
(0)
1 Stars:
(0)
Schrijf een recensie
Merk op: Uw beoordeling wordt gepubliceerd nadat deze handmatig is gewist.