The aquaduct 360 eco+ mark II is a combination of high-quality components and incredible performance at a very reasonable price. The focus during development was on creating a compelling design and cooling power that sets a new standard for price-performance ratio. All of this was achieved with the aquaduct eco series. The system is a breeze to operate, reliable, and extremely compact.
The name comes from the bridge-like component, which allows water to flow over it and down the other side. The aquaduct is a combination of passive and active radiator, giving you the best of both technologies in one product. In order to make the aquaduct as maintenance-friendly as possible, large reservoirs were integrated into the passive cooling profile. This reduces the need to refill the water during the yearly maintenance process.
The aquaduct 360 eco mark II contains a microprocessor-controlled 12 V pump, a triple radiator, and a specialised electronic control designed for the requirements of an external water cooling system. The free aquasuite 2012 software enables intuitive configuration and observation of the aquaduct.
The integrated innovative control and monitoring system monitors and controls the pump as well as the integrated fans. The water temperature, air temperature, and internal electronic temperature of the aquaduct are also monitored. Alternatively, the fans can be regulated by RPM or voltage as well.
A PCI(e) slot cover is included for installation in a PC. The aquaduct is powered through the slot cover. The card requires a free power socket in the PC power supply.
A tacho signal outlet with an artificially generated tacho signal allows for emergency shutdown of the PC via the motherboard BIOS.
Furthermore, two openings in the slot cover allow you to easily lead the plug&cool tubing through into the case interior.
The electronics in the eco+ series also allow for an external flow rate sensor to be connected to the aquaduct. This can be mounted in the PC and connected to the slot cover. Corresponding warning levels for the alarm can then be set in the aquasuite, and the flow rate can be monitored visually.
In case of an alarm (configured by the user), an acoustic warning signal can be emitted from the device. The PC can also be shut down via the tacho signal. The alarm analysis is very extensive and of course includes temperature and fan monitoring as well.
Radiator: airplex pro 360
Fans: 3x airstream 120 mm, manual RPM and temperature regulation with various modes, configuration via USB through software
Pump: 12 V, microprocessor controlled with adjustable power and monitoring function
Control: USB connection to PC available
590 x 224 x 108 mm
Weight 9.5 kg
Scope of delivery:
aquaduct 360 eco+ mark II external watercooling system (completely assembled)
Two plug&cool straight connectors (mounted on device)
PCIe slot cover with board
Cable to connect aquaduct to slot cover (ca. 2m)
USB connector cable (ca. 2m)
plug&cool tubing - flow and return (each ca. 2m)
Double Protect Ultra coolant (1000 ml)
Not included in set, available separately:
Suitable watercooler for your hardware
Klicken Sie hier, um diese Frage(n) anzuzeigen.
Klik hier om deze beoordelingen te bekijken.
Ich finde es sieht sehr stylisch aus!
Super Leistung. NAch dem Entlüften kaum zu hören. Über die Aquasuite wunderbar einzustellen. Mein Tipp : einstellen auf ca 68-71 l/h. Da ist sie kaum zu höhren.
An sich ein tolles Teil aber bei mir machte die Pumpe sehr laute Geräusche (fast wie eine elektrische Zahnbürste) und die Kommunikation zwischen PC und Steuereinheit per USB ist nur sporadisch vorhanden gewesen, weshalb ich das Teil zurückgeschickt habe. Wenn alles funktionieren würde, hätte ich 5 Sterne vergeben da der "Kühlturm" optisch sehr gut aussieht.