The ideal addition to the Alphacool DC-LT ceramic 12 Volt pump equipped with a Alphacool DC-LT Plexi top.
The Alphacool reservoir individual for DC-LT pump is another module for expansion and improvement of the Alphacool DC-LT ceramic 12 Volt pump. As basis a pump already equipped with an Alphacool DC-LT Plexi top is used. With only few steps this pump can now be additionally equipped with a reservoir. Simply place the reservoir on the included ring gasket and tighten the four also included screws in the corners: Done!
¼” threads are machined into the side of the reservoir. They can be used as an Inlet or for a lighting module.
Material: Röhm Plexiglas GS / brass
Color: Transparent / black
Dimensions (LxWxH): 49x49x56mm (without fittings, without pump)
Connection threads: 1x ¼”
Fill level indicator thread: 1”
Extent of delivery:
1x Alphacool reservoir individual for DC-LT pumps
1x Fill level indicator with gasket
4 mounting screws
Please note: For operation of the top only one of the inlet openings is needed. Hence we recommend ordering a screw plug.
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|LED hole:||vorhanden (für 5mm LEDs)|
Klik hier om deze vraag (en) weer te geven.
Klik hier om deze beoordelingen te bekijken.
Passt perfekt zum Plexitop und wird auch etwas mitbeleuchtet, sofern im Pumpendeckel eine LED eingebaut wurde. Sehr schön anzusehen.