Jouw waterkoeling- en moddingdistributeur Jouw waterkoeling- en moddingdistributeur

Alphacool Eisbecher Lighttower All-in-One 250mm Acetal reservoir

  • 1011362
  • 15236
  • 4250197152365
  • 0,692 kg

4 op voorraad

€ 35,09 * € 62,78 * (44,11% bespaard)

Prijzen incl. btw excl. verzendkosten

Aanbevolen accessoires
Meerprijs
Alphacool Aurora LED Ring 60mm - red
1x
Alphacool Aurora LED Ring 60mm - red
€ 8,79*
Alphacool Aurora LED Ring 60mm - white
1x
Alphacool Aurora LED Ring 60mm - white
€ 14,79*
Alphacool Aurora LED Ring 60mm - uv
1x
Alphacool Aurora LED Ring 60mm - uv
€ 15,79*
Alphacool Aurora LED Ring 60mm - blue
1x
Alphacool Aurora LED Ring 60mm - blue
€ 15,79*
Alphacool Aurora LED Ring 60mm - green
1x
Alphacool Aurora LED Ring 60mm - green
€ 8,79*
Alphacool 120/140mm mounting bracket for Alphacool Eisbecher - 2 pcs
1x
Alphacool 120/140mm mounting bracket for Alphacool Eisbecher - 2 pcs
€ 8,99*
Alphacool Aurora LED Ring 60mm - RGB
1x
Alphacool Aurora LED Ring 60mm - RGB
€ 21,79*
Eheim 1046-790 230Volt full ceramic bearing
1x
Eheim 1046-790 230Volt full ceramic bearing
€ 49,79*
Eheim 1048-790 230Volt full ceramic bearing
1x
Eheim 1048-790 230Volt full ceramic bearing
€ 62,99*
Eheim 1046-12Volt full ceramic bearing pump separate (without AC/DC transformer)
1x
Eheim 1046-12Volt full ceramic bearing pump separate (without AC/DC transformer)
€ 43,00*
Hydor L30 II water pump
1x
Hydor L30 II water pump
€ 27,99*
Phobya DC12-260 12Volt Pump
1x
Phobya DC12-260 12Volt Pump
€ 41,00*
Phobya DC12-400 12Volt Pump
1x
Phobya DC12-400 12Volt Pump
€ 45,99*
Phobya DC12-220 12Volt Pump
1x
Phobya DC12-220 12Volt Pump
€ 34,99*
Phobya DC12-260 PWM 12Volt pump
1x
Phobya DC12-260 PWM 12Volt pump
€ 43,99*
Phobya DC12-400 PWM 12Volt pump
1x
Phobya DC12-400 PWM 12Volt pump
€ 49,99*

Reinvent the tube   The Eisbecher Series consist of 20 different reservoirs that differ...meer
Productinformatie


Reinvent the tube 

The Eisbecher Series consist of 20 different reservoirs that differ between usage, measurement and appearance. There are ten reservoirs within this series that consist of 99% plexi - totally unique! But the main difference between these reservoirs is within the functionality of the different sockets.

Constituents

Bubble Down
It is placed at the bottom of the reservoir to prevent turbulences that could lead air into the watercircle. 

Lighttower Standpipe
The "Lighttower" effect creates an astounding visual experience within every watercooling system. The Eisbecher supports this in two different ways: fluid coming from the bottom and coming from the top. The water is being led through the standpipe to the bottom or to the top where it splashes out of eight evenly distributed holes at the end of the pipe to the inner wall of the reservoir. This special watergame is the so called "Lighttower" effect. 

Stand
The known feet from the "Eisdecken" find its very way even to the Eisbecher and sustain every combination with a solid stand.


Mountings
There are two mountings placed above and under the pipe for fastening the lot in the casing. The holes in this mounting have a spacing of a 120/140 cooling fan.You can reduce the width of the mountings up to the width of the reservoir and there are three M4 threads availaible per mounting for fastening if you would rather not mount the reservoir at the fan space. These mountings are easily removeable especially when not being used. You will find these mountings on all 20 reservoirs.

Lighting module
The lighting modules consist of plexi and enable the lighting with a 5mm LED. These modules can be installed into all 1/4" holes. They are being used in the lid and occasionally in the socket of the reservoir. This facilitates a unique way to your personalised lighting effects.

Material
All models of the reservoir are availaible in acetal and plexi. So there is something for everone.

Measurements

All reservoirs are availaible in two different sizes: the 150mm version and the 10cm bigger 250mm version. The smaller reservoir comes with only one standpipe coming from the bottom because of its size and the bigger reservoir comes with two: one coming from the top and the other one from the bottom.











 

The Eisbecher Lighttower All-In-One 

Where most reservoirs can only handle one or two different pumps this version can handle a whole row of different pumps. Alternatively, you can even use the Lighttower All-In-One without a pump. This special flexibility of the reservoir falls back onto its sophisticated construction. At the back of the socket of the pump is a 1/2" wide thread where a whole range of different pumpadapters can be installed. This adapter enables an easy mounting of different pumps. The peforated plate and the standpipe are being used in this model as well. This version of the Eisbecher is by far the most versatile.



Included in delivery:

  • 4x M4x16mm screw
  • 4x M4x8mm screw
  • 4x M4 nut
  • 1x G1/4" locking screw
  • 1x pump adapter for Phobya DC12 - 220
  • 1x pump adapter for Phobya DC12 - 260/400
  • 1x pump adapter for Eheim 1046/1048; with three additional adapter even Eheim 1260/1262, Laing D5 inkl. 1/2" AG (Standard Laing attachment), Hydor L30
  • 1x allen key 2,5mm 

 

Measurements 250mm Version:

  • Measurements with mounting (LxWxD): 270 x 136 x 80mm
  • Measurements without mounting(LxW): 270 x 60mm

  • Diameter of the Plexitube: 60mm




  • Capacity: 360ml

Download 3D-file (.stp)

Notice:

Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.

We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.

Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.

Notice:

In order to use the intake from the top, a G1/4” extension piece is necessary (article 1011183-1011186), since the screw thread is embedded a few mm into the lid and many compression fittings will not be able to be screwed in. 

Awards and documents
Techmische details en video's meer
Technische details
Manufacturer: Alphacool
Materiaal: Plexiglas, POM
Kleur: transparant
Compatibiliteit pomp: voor flow pompen
Voorgeinstalleerde pomp: nee
Aansluiting: G1/4" Innengewinde
Fillport: G1/4" Innengewinde
LED hole: niet beschikbaar
Type reservoir: Buis reservoirs - 60mm
Videos
Questions & Answers more
Questions & Answers
Frage von Manga vom 10. October 2017
Hi, is this compatible with the EK-DCP 4.0 pump?
Antwort von Administrator vom 10. October 2017
Sorry, no. We do not have a reservoir with pump top that fits on that EK pump.
Frage von Jack F. vom 06. June 2018
Can i use this without a pump installed on it?
Antwort von Administrator vom 06. June 2018
Yes that's possible, but you need an item like 46181 and a G1/4'' screw like 1011181
Frage von Guest #315438 vom 08. August 2018
Am i able to use my swifttech (d5), as i see the one with the included d5 appears to have a different base in which you can attach the pump directly, which I would prefer.
Antwort von Administrator vom 08. August 2018
So I understand you right that you would prefer a direct connection, i would recommend you item 1011330
4 Vraag (vragen) in andere talen.
Klik hier om deze vraag (en) weer te geven.
Frage von Axel J. vom 02. February 2016
Ich wollte mal wissen, ob die LED`s dabei sind, oder ob man sie extra bestellen muss?
Antwort von Administrator vom 02. February 2016
Die werden extra bestellt :)
Antwort von Daniel N. vom 03. March 2016
Kann man den auch als standalone agb hernehmen?
Frage von Philip H. vom 07. July 2016
Guten Abend, der Artikel: 1011191 müsste doch an den beiden unteren Stellen passen?
Antwort von Administrator vom 07. July 2016
Passt ohne weiteres :)
Frage von Guest #276920 vom 05. May 2017
Hallo, ich würde gerne wissen, ob es einen Adapter für die Direktverbindung vom Eisbecher zu einer Aquastream (Ultimate) gibt. Habe beim Zubehör den Alphacool Lighttower Adapter für Eheim 1046/1048 (Artikelnr.: 46212) gefunden, würde dieser passen? Schon mal Danke für die Hilfe
Antwort von Administrator vom 05. May 2017
Die Aquastream ist eine normale Eheim Station 1046 nur mit einer erweiterten Steuereinheit. Der Artikel 46212 ist somit der perfekte Adapter für ihr Vorhaben.
Antwort von Filip B. vom 11. November 2017
Laut Lieferumfang ist doch schon ein 1046/1048 Adapter dabei?
Frage von Manfred K. vom 04. April 2018
Hallo, wie kann der Ausgleichsbehälter auf- bzw. nachgefüllt werden, wenn erfest im System eingebunden ist, da oben nur eine Öffnung vorhanden ist? Besten Dank im Voraus.
Antwort von Administrator vom 04. April 2018
Die obere Öffnung wird zum Befüllen genutzt. Sofern sie den oberen Anschluss als IN verwenden, können sie immer noch den Deckel aufschrauben oder sie verwenden etwas über dem Ausgleichsbehälter einen Y-Adapter zum Befüllen. Allerdings ist es nicht ratsam den oberen Anschluss zu nutzen, da beim Stillstand des Systems die Luft nach oben in den Kreislauf wandern wird.
Antwort von Manfred K. vom 04. April 2018
Danke sehr für die schnelle Antwort.
heb je een vraag?
Merk op: Uw vraag zal publiekelijk zichtbaar zijn en kan worden beantwoord door een lid van onze community en door ons ondersteuningsteam. U kunt uw openbare gebruikersnaam en uw instellingen voor e-mailmeldingen in uw klantaccount bewerken.
Lees, schrijf en bediscussieer reviews...meer
Beoordelingen
5 Stars:
(1)
4 Stars:
(0)
3 Stars:
(0)
2 Stars:
(0)
1 Stars:
(0)
1 Beoordeling (en) in andere talen.
Klik hier om deze beoordelingen te bekijken.
Schrijf een recensie
Merk op: Uw beoordeling wordt gepubliceerd nadat deze handmatig is gewist.
Aquatuning AT-Protect Clear 1000ml Aquatuning AT-Protect Clear 1000ml
Inhoud 1000 ml
€ 5,49 *
Hose cutter Hose cutter
€ 5,99 *
Alphacool CKC Cape Kelvin Catcher Clear Kanister 3000ml Alphacool CKC Cape Kelvin Catcher Clear...
Inhoud 3000 ml (€ 6,93 * / 1000 ml)
€ 20,79 *
-18%
Phobya CPU-Cooler UC-2 LT Intel 775,1150,1151,1155,1156,1366,2011,2066 - Plexi Edition Phobya CPU-Cooler UC-2 LT Intel...
€ 35,09 * € 43,00 *
-29%
-27%