The step towards perfection
The new Alphacool AGB comes in three different models. You can either connect a Laing DDC, the Alphacool DC-LT or the Laing D5/Alphacool VPP655 at the backplate depending on the model which you use.
The brushed plate provides an optical finishing touch which is underlined by the high quality processing. The front consists of a scretch-secure soft-touch surface painted in black-matt.
The Eisfach is mounted in two of the front 5,25" bays which provides a good overview of the container and the fill level is easily being checked through the lighted window at the back. Additionally, the Alphacool logo in the front can be lighted by connecting the 3-pin connector with a power source.
A lot of details complement the first impression!
Two 1/4" holes at the top side are available for the first filling. To refill you can simply remove and extract the fillport in the front and two 1/4" holes at the bottom side facilitate the draining of the liquid. There are two lighting modules at the right hand side at the back of the container behind the window for 5mm LEDs. This provides a unique opportunity for personalised lighting and optic. Further two holes at the left hand side provide additional opportunities to fill or drain the liquid. The last two 1/4" threads are used to fill or drain the container. A Bubble Down module has been placed behind the inlet to prevent turbulences that could lead air into the watercircle.
material: plastic and metal
measurements (LxDxH): 148 x 132 x 84,5mm
connector thread: 10x 1/4"
lighting: 2x 5mm LED
Scope of delivery:
1x Alphacool Eisfach
The container is being delivered without a pump. Please order one seperately or together with this on as a set!
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Materiaal:||Aluminium, Plexiglas, POM, Nylon|
|Compatibiliteit pomp:||voor 1x D5|
|LED hole:||vorhanden (für 5mm LEDs)|
|Type reservoir:||2x 5 1/4" Bayres|
|Afmetingen:||148 x 132 x 84,5mm|
|Number of connections:||10|
Klik hier om deze vraag (en) weer te geven.
Klik hier om deze beoordelingen te bekijken.
très jolie réservoir , avec le remplissage par l avant . le seul bémol , très compliquer pour m a part a faire amorcer la pompe d5 avec celui ci .