Jouw waterkoeling- en moddingdistributeur Jouw waterkoeling- en moddingdistributeur

Alphacool Repack - Single Laing D5 - Dual 5,25 Bay Station incl. 1x Alphacool VPP655

  • 1012161
  • 15252
  • 4250197152525
  • 1,259 kg

1 klaar voor verzending, levertijd 1-3 dagen

€ 109,79 * € 150,10 * (26,85% bespaard)

Prijzen incl. btw excl. verzendkosten

Reservoir: Alphacool‘s high-class solution for integration of single VPP and TPP pumps into a...meer

Alphacool‘s high-class solution for integration of single VPP and TPP pumps into a cooling loop.

Pump top and reservoir in one component offer many advantages: Easy mounting, compact dimensions and appealing looks! All this is combined and perfected in the new Alphacool Repack. But Alphacool would not be Alphacool if these new products would not feature innovations which were before not available in this configuration!

Alphacool Repack - Single Laing D5 - Dual 5,25 Bay Station is for designed installation in the front of an enclosure. For mounting two vacant 5.25” drive bays are required. 

Technological innovations featured in the Alphacool Repack:
So far the information about the reservoir sounds like a standard reservoir, but the developers have had many great ideas to solve common problems.

Anti Cyclon:
Different than standard solutions, where the coolant is guided around many edges and corners, still leaving micro-bubbles in the coolant, this reservoir uses a completely new technology. A new kind of filter is placed in front of both pump inlets, marked with “in” & “out”, eliminating the problem of micro bubbles at the core.

On standard Slot-In reservoirs filling was a hassle: Unscrew, pull out, fill, fixate again. And during filling a third and fourth hand would always come in very handy, as it is always a very difficult operation to fill in the coolant. Enough! The front is equipped with a filling straw which can be released with few turns, and as it is hollow it can be used for filling of the reservoir. For this we recommend the filling bottles or straws from our portfolio.

The looks:
The front, which is mainly what remains visible after mounting, is beautiful to look at: Plexi, Acetal, fill level indicator and filling straw in combination with the typical Alphacool copper look make a great appearance! The next step is the creation of lighting effects for the coolant. From the left and right side of the reservoir LEDs can be inserted, both 3mm and 5mm in site. The highlight: a 10cm long cold light cathode can be inserted from the top for maximum lighting performance! In combination with the LED it is even possible to implement different colors within the reservoir. Creative users will surely create even more effects with the Heatmaster and find new ideas.

Looking at all of these features, more power, great looks and comfortable handling, a simple question comes up: Why only high-class, this is already First Class!

Technical specifications:

  • Material: Plexiglas/Acetal/Blue
  • Color: Transparent/black/Copper
  • Connection threads: 2x ¼“ 
  • Dimensions (LxWxH): 125 x 148 x 84mm
  • Mount for 10cm CCFL

Conforms with ROHS

Note regarding cathodes:
We have measured that the cathodes have manufacturing tolerances of up to 0.3mm, even amongst the cathodes in the same package. As the fit of the cathodes is meant to hold them in place, it might be that due to the tolerances the cathodes will not fit at first. The small amount of excess material can easily be removed with a few brushes of sandpaper.

Important Note: Please note that the firm Alphacool International GmbH accepts no liability for damages of this product by using other coolants. We would like to point out that other coolants as inhibitors often contain alcohol or other corrosive substances attack the acetal, please only use Cape Kelvin Catcher or Innovatek Protect.


Alphacool's new power pump series, exceptional performance at an unbeatable price. The 12V pumps can simply be connected directly to the system PSU and the pump will start with your PC for maximum convenience and safety.

This pump is ideal for PC and other electronics water cooling. The DC pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. The spherical bearing of the rotor offers many advantages: For example an increase of bearing play is impossible due to the design, allowing the pump to run quietly and smoothly over its whole lifespan. A separate magnetic shielding of the pump is not needed.

The ball motor design allows efficient operation of the pump in combination with excellent performance. The pump can simply be connected to a 12V Molex connector of the system PSU.

The special feature of this model is the fact that only the pump core itself is shipped. Why pay more for all the things you won't need when using this pump with a third-party pump top?  Another feature is the ability to be adjusted in five speed settings.

Technical specifications:

  • Dimensions (WxHxD): 65x65x57mm (without connectors)
  • Motor: Electronically commuted spherical motor
  • Rated voltage: 12V DC
  • Power consumption: 23W
  • Permitted voltage range: 8-24V DC
  • Pressure head at 12V: 3,7m
  • Maximum flow: 350l/h
  • Pumped media: Water, water/glycol mixtures
  • Maximum system temperature: 60°C
  • Materials: Stainless steel 1.4571, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
  • Special features: Adjustable in five steps
  • Step 1: 1800 rpm
  • Step 2: 2550 rpm
  • Step 3: 3300 rpm
  • Step 4: 4050 rpm
  • Step 5: 4800 rpm
  • Power connector:  4 Pin Molex

Datasheet D5 Pump VPP655


Extend of delivery:

  • Alphacool Repack - Single Laing D5 - Dual 5,25 Bay Station incl. 1x Alphacool VPP655
  • mounting material
  • allen key

Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.

We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.

Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.

Awards and documents
Techmische details en video's meer
Technische details
Kleur: zwart
Manufacturer: Alphacool
Materiaal: Plexiglas
Aansluiting: G1/4" Innengewinde
Fillport: G1/4" Innengewinde
Compatibiliteit pomp: voor 1x D5
LED hole: vorhanden (für 5mm LEDs)
Type reservoir: 2x 5 1/4" Bayres
Voorgeinstalleerde pomp: Ja
Questions & Answers more
Questions & Answers
4 Vraag (vragen) in andere talen.
Klik hier om deze vraag (en) weer te geven.
Frage von Steffen M. vom 06. June 2016
Ist dieser Artikel kompatibel mit dem Artikel "30269"? Bleibt der Kunststoff unversehrt von Rissen und sonstigen beschädigungen?
Antwort von Administrator vom 06. June 2016
Ja, der AGB ist damit Verträglich.
Frage von Guest #251372 vom 04. April 2017
Leider ist IN und OUT nicht beschriftet?! Ist dies bei diesem Modell egal? Besten Dank für die Hilfe
Antwort von Administrator vom 04. April 2017
IN ist von hinten gesehen der untere Anschluss, OUT ist der Obere.
Frage von Guest #251372 vom 05. May 2017
Bin die Komponenten für einen neuen PC am prüfen...Frage: Für was wäre denn der blaue 1Pol Anschluss? Wo wird dieser angeschlossen? Ist dieser Anschluss zwingend oder reicht die 12V Speisung. Besten Dank für die Hilfe.
Antwort von Administrator vom 05. May 2017
Das blaue Kabel wird auf den CPU-Fan Header gesteckt, um die Drehzahl der Pumpe auszulesen.
Frage von Kay v. vom 10. October 2017
Dachte zuerst die Füllstandsanzeige wäre ein Thermometer das hätte mir gefallen. Meine Frage: wird die Pumpe vom Mainboard gesteuert wenn man über den 4pin WMP Stecker damit verbindet? Sollte man sie in dem Fall immer auf Stufe 5 betreiben?
Antwort von Administrator vom 11. November 2017
Diese Pumpe kann nicht über das Mainboard gesteuert werden. Die Pumpe hat keinen 4-Pin PWM Stecker sondern einen 4-Pin Molex Anschluss für die Stromversorgung. Der 3-Pin Anschluss dient lediglich zum Auslesen der Drehzahl. Für die meisten Kreisläufe aus CPU und GPU reicht es, wenn man die Pumpe auf Stufe 2 stellt, dann ist sie auch kaum hörbar.
Lees, schrijf en bediscussieer reviews...meer
5 Stars:
4 Stars:
3 Stars:
2 Stars:
1 Stars:
Alphacool CKC Cape Kelvin Catcher Clear Kanister 3000ml Alphacool CKC Cape Kelvin Catcher Clear...
Inhoud 3000 ml (€ 7,40 * / 1000 ml)
€ 22,19 *