Jouw waterkoeling- en moddingdistributeur Jouw waterkoeling- en moddingdistributeur

Alphacool Laing DDC310 - Complete Edition Eisdecke - black/acetal

> 50 klaar voor verzending, levertijd 1-3 dagen

€ 72,92 *

Prijzen incl. btw excl. verzendkosten

Aanbevolen accessoires
Phobya external PSU 230V to 4Pin Molex 34 Watt including Euro/UK plug
Phobya external PSU 230V to 4Pin Molex 34 Watt including Euro/UK plug
€ 17,95*
Alphacool's new Laing Low Noise Edition for absolute silence! The well-known Laing DDC pumps...meer

Alphacool's new Laing Low Noise Edition for absolute silence!

The well-known Laing DDC pumps are getting a new addition. Though freshly packaged, this pump can begin its life with lots of self-confidence. A few details have been changed. First, we held back a little in performance in order to solve a widespread problem: the volume! Few other pumps can match this one in terms of reducing noise generation from water. For the most up-to-date water cooling systems with CPU and GPU cooling, this pump should be the first choice.

Unlike before, this pump does not come in the familiar plastic casing. It has an all-new perfectly tailored brass case gracing its exterior. This new case ensures a longer lifespan for the pump. Air flows through the cooling fins, then over an interior thermal pad directly to the pump board. 

Another feature is the included decoupling option. With the special M4 screws, the included decoupling can be screwed into the head of the screws and then attached to the case.

The innovation in this set is that it uses the V.2 of the Alphacool "Eisdecken", which provides you the options of three G1/4" connections for the inlet and two G1/4" connections for the outlet.

Inlet options: front, side, top

Outlet options: front, top

The scope of delivery also includes three G1/4" screw plugs for sealing the unused in/out connection ports.

Another feature is the pre-installed brackets, as seen before on the new "Eisbecher". This allows the pump set to be mounted directly onto the case bottom. 

Now available as a combo with the tried and tested Alphacool Eisdecke Laing DDC Plexi or Acetal Top!

Technical Details:

  • Dimensions: 89 x 85 x 75mm
  • Colour: black nickel / black
  • Power consumption: 10W
  • Material: brass, stainless steel, aluminium oxide, hard carbon
  • Maximum head: 2.44m
  • Maximum system temperature: 60°C
  • Maximum flow rate: 200L/h
  • Voltage: 12V DC
  • Electrical connection: 4 pin Molex
  • Speed sensor: 3 pin Molex

Scope of Delivery:

  • 1x Alphacool Laing DDC310 pump
  • 1x Alphacool Laing DDC metal bottom - black nickel
  • 1x Alphacool Eisdecke Laing DDC acetal top V.2
  • Decoupling set
  • Mounting material



Download 3D-file (.stp)


Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.

We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.

Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.

Awards and documents
Techmische details en video's meer
Technische details
Kleur: zwart
Materiaal: antraciet, Aluminiumoxid, Messing
Afmetingen: 61 x 60 x 21 mm
Afmetingen: 200l/h, Standard (kleiner 500l/h)
Max. hoogteverschil: 2,44m, Good (2 to 4m)
Stroomverbruik: 10W
Stroomaansluiting: 4Pin Molex
Spanning: 12V DC
Geluidsniveau: G1/4" Innengewinde
Levensduur: G1/4" Innengewinde
Materiaal: Wasser, Wasser/Glykol-Gemisch
Manufacturer: Alphacool
Stroomaansluiting: 60°C
Questions & Answers more
Questions & Answers
Frage von Jean G. vom 06. June 2016
Is this a reservoir and a pump?
Antwort von Administrator vom 07. July 2016
No, only pump with a top for G1/4" threads.
Frage von Guest #283001 vom 08. August 2017
Does it come with the two black g1/4 plugs shown on in1 and out1?
Antwort von Administrator vom 08. August 2017
All Alphacool products have always enough g1/4 plugs to close all not needed holes.
Frage von Sam A. vom 01. January 2018
How many components can this run fluid through? I have an Alphacool xt45 360, st30 120, nexXxos gpx RX Vega and an EK Supremacy Evo to all add resistance to a soft tube loop and then a small reservoir which doesnt really add any resistance and really this is all fairly low resistance stuff anyways but this pump is only what 10 w and has 8 feet of head at about a gallon per minute? Is this adequate or would it be highly recommended that I add a gpx pro?
Antwort von Administrator vom 01. January 2018
You have a normal loop with not too many parts. This pump is strong enough for your loop. You do not need a GPX-Pro or a stronger pump.
3 Vraag (vragen) in andere talen.
Klik hier om deze vraag (en) weer te geven.
Frage von Jens K. vom 11. November 2016
Könnte man z.B an einem Ausßlass ein Kugelhahn montieren um das System zu entleeren?
Antwort von Administrator vom 11. November 2016
Ja das ist möglich. Es wäre nur gut das Sie den Kugelhahn an der tiefsten Stelle im System einbauen.
Frage von Guest Svartkrake vom 04. April 2017
Diese Pumpe ist ja grundsätzlich nicht regelbar. Ist es dennoch technisch möglich, sie ohne zu überhitzen mit niedrigeren Spannungen als 12 V zu betreiben? Hätte dies Auswirkungen auf die Gewährleistung, falls ein Defekt auftritt?
Antwort von Administrator vom 04. April 2017
Eine Pumpe läuft nur heiß, wenn sie ohne Wasser läuft. Sie dürfen niemals die Pumpe im trockenem laufen lassen. Wenn die Pumpe im Wasserkreislauf eingebunden ist und sie dann die Pumpe drosseln, ist das Schlimmste was passieren kann, dass die Pumpe stoppt und so den Wasserkreislauf nicht mehr in Gang hält. Dann überhitzen ihre Komponenten. Die DDC310 ist schon eine stark gedrosselte DDC Pumpe und wohl die von Haus aus leiseste Versione überhaupt. Viel Spielraum haben sie hier nicht.
Frage von Marcus_ vom 10. October 2017
die Abmessungen auf der "Details"-Seite passen nicht... wenn ich vorher gewusst hätte, dass unter "Beschreibung" die richtigen Maße stehen, müsste ich jetzt nicht bohren. Ärgerlich!
Antwort von Administrator vom 10. October 2017
Danke für diesen Hinweis, es wird korrigiert.
Lees, schrijf en bediscussieer reviews...meer
5 Stars:
4 Stars:
3 Stars:
2 Stars:
1 Stars:
1 Beoordeling (en) in andere talen.
Klik hier om deze beoordelingen te bekijken.
Alphacool tubing AlphaTube HF 13/10 (3/8"ID) - clear 3m (9,8ft) Retailbox Alphacool tubing AlphaTube HF 13/10 (3/8"ID) -...
Inhoud 300 cm (€ 3,48 * / 100 cm)
€ 10,45 *