- Artikelnr.:: 1012078
- SKU: 18494
- EAN: 4250197184946
- Gewicht:: 0,087 kg
> 50 op voorraad
Prijzen incl. btw excl. verzendkosten
|Max. druk:||4 Bar (bij 20°C)|
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system.
The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression.
Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason.
All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes.
To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®.
(Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316, Dremel® - Art.No: 32196 and 32229)
The following options are available:
- HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm
- HardTube borosilicate glass 13/10mm 40cm and 60cm
- HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm
- HardTube borosilicate glass 16/11mm 40cm and 60cm
Scope of delivery:
- 1x HardTube borosilicate glass 13/10mm 60cm
Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc.
Due to the made-to-fit pipes, the connections must be plugged straight with a little effort.
This article is not compatible with Monsoon fittings.
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
Klicken Sie hier, um diese Frage(n) anzuzeigen.