- Artikelnr.:: 63032
- EAN: 4049469031916
- Gewicht:: 0,018 kg
> 50 klaar voor verzending, levertijd 1-3 dagen
Prijzen incl. btw excl. verzendkosten
12mm barb fitting made from nickel coated brass for PVC, PU, PA, silicone or PE hoses with an inner diameter of 11-13mm. G1/8" outer thread. The hose has to be fixated with a hose clamp or a zip tie. Inner diameter of fitting: 9,4mm.
Note for watercooling beginners:
The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
|Compatibiliteit:||weiche Schläuche (PVC, Silikon, Neoprene), Stiff tubing (PUR)|
|2e pagina:||G1/8" Außengewinde|
|1e pagina:||Slangtule 12 & 13mm (1/2")|