Bespaar met de volgende bundel
High-Flow barb fittings for hoses with an inner diameter of 11-13mm. Technical data:...meer
High-Flow barb fittings for hoses with an inner diameter of 11-13mm.
Overall length: 29mm
Inner diameter of hose: 11 bis 13mm
Inner diameter of fitting: 10mm
Thread length: 8mm
Note for watercooling beginners:
The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
Techmische details en video's meer
|Compatibiliteit:||weiche Schläuche (PVC, Silikon, Neoprene), Stiff tubing (PUR)|
|2e pagina:||G1/4" Außengewinde|
|1e pagina:||Slangtule 12 & 13mm (1/2")|
Questions & Answers more
Questions & AnswersNo question has been asked yet.
Do you have a question?
Lees, schrijf en bediscussieer reviews...meer