Jouw waterkoeling- en moddingdistributeur Jouw waterkoeling- en moddingdistributeur

Alphacool Eisbaer 120 CPU - black

Levertermijn overschreden

€ 94,99 *

Prijzen incl. btw excl. verzendkosten

Aanbevolen accessoires
Meerprijs
Alphacool Eisbaer Intel mounting kit socket 2011-3 narrow ILM
1x
Alphacool Eisbaer Intel mounting kit socket 2011-3 narrow ILM
€ 5,69*
Alphacool Eisbaer Quick-Connect Extension Kit
1x
Alphacool Eisbaer Quick-Connect Extension Kit
€ 18,79*
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 240mm radiator
1x
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 240mm radiator
€ 62,99*
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 280mm Radiator
1x
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 280mm Radiator
€ 76,99*
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 360mm Radiator
1x
Alphacool NexXxos Eiswolf / Eisbaer Ready ST30 Full Copper 360mm Radiator
€ 79,99*
Techmische details en video's meer
Technische details
Manufacturer: Alphacool
Prefilled: Ja
Prestatieklasse CPU-waterblok: Uitstekend
Radiator Thickness: 45mm
Radiator afmetingen: 1x120mm
Slangmaat: 11/8mm
Socket: AMD AM3(+)/AM3/AM2(+)/AM2/939/FM2(+)/FM2/FM1/G34/940, Intel 1151/1150/1155/1156/755/2011-3/2011/1366/771/604, Intel 2066
Videos
With the “Eisbaer”, Alphacool is fundamentally revolutionizing the AIO cooler market. Where...meer
Productinformatie

With the “Eisbaer”, Alphacool is fundamentally revolutionizing the AIO cooler market. Where traditional AIO CPU-coolers are disposable products which are neither upgradeable nor refillable, the Alphacool “Eisbaer” is modularly built and can be upgraded, rebuilt or refilled at any time. This means that the “Eisbaer” is not only an AIO, but also fully built on classic water cooling components. That means it is quieter and more powerful than the average AIO solution.

The individual components:

Radiator
Alphacool depends on a radiator made of pure copper. The base of the radiator is the popular Alphacool NexXxoS series, which is well-loved around the world. The pure copper construction raises the cooling performance enormously compared to the usual aluminium radiators used in classic AIOs. The slight thickness of the fins ensures enormous cooling power in fans with low rotational speed. This ensures that the performance of the “Eisbaer” when adjusting the fans down decreases much more slowly than in radiators with higher fin thickness.

Hoses
The flexible PVC hoses make installing the “Eisbaer” easy. These hoses are easier to arrange and move into the right position. So the hoses don’t bend and stop the flow of the water, both hoses have been fitted with anti-kink springs. The 11/8 mm size is also a standard in the water cooling field, alongside the 13/10 and 16/10.

Quick-lock closure
The “Eisbaer” was designed with expandability directly in mind. This is why you’ll find a quick-lock closure on one of the hoses. This quick-lock mechanism is compatible with Alphacool HF quick-lock closures (1010383, 1010394, 1010395, 1010442), with which the circuit can easily be expanded to include anything from a radiator to a graphics card cooler. Furthermore, the “Eisbaer” is compatible with the upcoming Alphacool GPX-Pro graphics card AIO, which will use identical quick-lock closures.

Fans
The “Eiswind” fans were developed specially for radiators and generate a high static pressure in order to push cool air through the fan blades. Both fans can be regulated with PWM to anywhere in an enormous range from 550 to 1700 RPM. A PWM Y-adapter is included with the “Eisbaer” so that both fans can be controlled by the motherboard or a separate fan control with a PWM connection.

Connectors
All connectors are based on the classic G1/4 inch thread, the standard thread in the water cooling field. This way, all attachments can be switched out for others any time as desired. This also means that, for example, you could later decide to switch to thicker hoses or even HardTubes and set your system uniquely apart.

All these features make the “Eisbaer” cooler into something extraordinary. Its enhanced appearance from the illuminated logo and the illuminated reservoir, which also contains the pump, lets the interior of your PC shine in a whole new way. The soft-touch surface of the pump case is a further visual highlight. 
With the “Eisbaer”, you get an all-around perfect product that is not only extremely high-powered but also works very quietly.

Pumps
The basis of the pumps is the Alphacool DC-LT Ceramic Ultra Low Noise, also available separately. The pump runs extremely quietly and can be regulated to between 7 and 12V. It can also be regulated through the motherboard. If the “Eisbaer” is being run alone, the 7V setting will still have next to no performance loss, as shown in diverse test results. The insulated pump case further perfects the noise generation and ensures that vibrations are almost completely absorbed.
The smooth and shiny polished copper base of the cooler ensures optimal heat absorption and can relay the heat over the fine slit structure of the cooler to the water quickly and efficiently.

Technical Details:

Pump (Alphacool DC-LT 2600 Ultra low noise Ceramic):

  • Speed: 2600 RPM
  • Voltage: 7-13.5V DC
  • Power consumption: 4W
  • Maximum flow rate: 70L/h
  • Maximum head: 0.85m

Fan (Eiswind 12):

  • Bearing: sleeve bearing
  • Voltage: 12V
  • Power connection: 4-pin PWM
  • Rated speed: 550-1700 (+/- 10%)
  • Airflow: 63.85 cfm / 108 m3/h
  • Static pressure: 1.66 mmH20
  • Volume: 29 dB(A)

Scope of Delivery:

  • 1x Alphacool Eisbaer 120 CPU - Black
  • 2x Eiswind Fan 120 (push & pull)
  • 1x Intel Backplate
  • 1x Intel bracket
  • 1x AMD bracket
  • PWM Adapter
  • Mounting material
  • 1x Thermal paste

 Technical drawing 

Manual

AM4 Socket Mounting

Notice for expansion:

Please take care not to mix up the IN and OUT ports. On the “Eisbaer”, the “outlet” is marked in “red” and the “inlet” in “blue”. On the components to be connected, it is the opposite. The coupling with the “blue” marking denotes the “outlet” and the coupling with the “red” marking is the “inlet”. This is important as in many coolers the flow direction is crucial for optimal cooling performance.

Questions & Answers more
Questions & Answers
Frage von Guest #283457 vom 07. July 2017
AM4 Kompatibel ohne Zusatzprodukte? Welcher Sensor passt zu der Kühlung und dem ASUS x370 Prime Pro?
Antwort von Administrator vom 07. July 2017
Bei der letzten Charge kam die AM4 Halterung dazu. Allerdings können wir ihnen aktuell (Stand 31.07.2017) nicht sagen ob das schon bei allen Modellen in unserem Lager der Fall ist. Daher sollten sie die Halterung mit der Artikelnummer 1012958 in jedem Fall dazu kaufen um sicher zu gehen. Was für eine Art von Sensor suchen sie denn?

Do you have a question?

Hinweis: Ihre Frage wird öffentlich einsehbar sein und kann - neben unserem Support - auch durch ein Mitglied unserer community beantwortet werden. Sie können Ihren öffentlich sichtbaren Namen und Ihre Email Benachrichtigungen in Ihrem Kundenkonto konfigurieren.
Lees, schrijf en bediscussieer reviews...meer
Beoordelingen
5 Sterne:
(0)
4 Sterne:
(0)
3 Sterne:
(0)
2 Sterne:
(0)
1 Sterne:
(0)
Phobya heatshrink 12mm (1/2") 3:1 black 30cm Phobya heatshrink 12mm (1/2") 3:1 black 30cm
Inhoud 30 (€ 5,32 * / 100 )
€ 1,60 *
Hose cutter Hose cutter
€ 5,39 *
Aquatuning AT-Protect Clear can 5000ml Aquatuning AT-Protect Clear can 5000ml
Inhoud 5000 ml (€ 4,60 * / 1000 ml)
€ 22,99 *
Phobya heatshrink 3mm (1/8") 3:1 black 30cm Phobya heatshrink 3mm (1/8") 3:1 black 30cm
Inhoud 30 (€ 3,97 * / 100 )
€ 1,19 *