The best Alphacool reservoir mounts of all times!
Many reservoir mounts were designed for the original tube reservoirs from the beginning of the PC water cooling sector. During the last years though, the reservoirs became larger, sized for more capacity and metal was integrated for the end caps. This resulted in heavier reservoirs, making the construction of more sturdy mounts imperative.
With this universal mounting system every tube reservoir with an outer diameter of 50 or 60mm can be mounted safely and securely!
The design is based on hose clamps, which are able to safely seal in pressures of multiple bar with their closed-loop clamping design.
Of course a possibility for LED installation was also implemented. Two slightly pre-drilled holes in the back can be drilled as needed, and nothing stands in the way of spectacular lighting for your reservoir.
Inner diameter: 50mm
Mounting hole diameter: M4
LED holes (not opened): per mount 2x 5mm
Extent of delivery:
1 pair Alphacool AGB Universal mount Clip-On 50mm – black 2 pcs
Note: For mounting additional screws are needed. We recommend ordering Item No. 46023 with the mounting clips.
Do you have a question?
Top Qualität, genau wie beschrieben
Produkt entsprach genau der Beschreibung, Anbau problemlos
Ich benutze die Halterungen für einen 450mm großen Röhren-AGB. Sichern also beim Befühlen vom Verrutschen des AGBs entsprechend ab. Qualität ist nicht super, Preis/Leistung ist aber Top!