|Afmetingen (L x B x H):||390 x 365 x 60mm|
|Dikte:||L - 60mm|
|Druk getest:||2 Bar|
|Fins per inch:||10|
|Schroefdraad tbv ventilatoren:||M3|
The absolute High-End radiator with excellent price-performance ratio! The new Phobya radiators offer top-of-the-line cooling performance combined with excellent appearance and high-grade build quality. The Phobya radiators of the new Xtreme series belong to the absolute High-end heat exchangers on the market. The copper fins are specially designed to work perfectly with Super-Silent fans (with low Airflow and noise level). The parallel cooling channels additionally ensure a low flow resistance. At the side of the radiator M3 threads are implemented to allow easy mounting e.g. on the case side.
This radiator can also be operated passively, the performance is plenty even for larger systems. For this purpose the fan grill can be removed to allow contact of the whole surface with the surrounding air which greatly improves passive cooling performance.
The radiator has 2 G1/4" connection threads for maximum fitting compatibility.
An additional new feature of the now completely black radiator are now the caps in brass black nickel. The sides on this version are mounted with a more complicated prodecdure which means that they are a bit more expensive but also look just great! More than that the V2 has not only copper fins, but also copper channels and copper chambers only the threads are made of brass. For those who what copper-only watersystems this radiator is the first choice.
Material: Copper fins, copper channels, copper chambers, brass threads
Connection threads: 2x G1/4"
Weight: approx. 3723g
Mounting possibility: 36x M3-threads on top (for 9x120mm fans)
Pressure tested: 2bar
Connection threads: 3x G1/4"
Extent of delivery:
36x M3x30mm Cross-slotted screws
1x screw plug
Please note before and during installation:
- Flush radiator before use
-The fan grill is loose until fans are mounted which fixate the grill
-Over-tightening of the screws can damage the radiator. Please make sure that the screws so not damage the radiator's fins. Damages due to improper use are not covered by the warranty.
-Other available M3 screws may be too long for use on this radiator. Make sure to only insert them so far that the radiator fins remain undamaged
Warranty: Warranty of seal and quality of manufacturing for 2 years.
The reddish brown "stains" on the fins is no rust. Please note that this is a copper radiator and the note: "The whole radiator was coated with a robust black lacquer. The fins are coated with a thinner layer to improve the appearance without compromising cooling performance.". The lacquer coat is made from the same material, hence the reddish-brown "stains".
Attention: The radiator can be damaged, if the screws are screwed too deep. Please pay attention to the right length of the screws. The screws do not have the same size in every delivery.
Do you have a question?
Sehr gut verarbeitet. Sehr große Kühlleistung. Beispiel gefällig: Ich habe zwei NOVA 1080 Radiatoren übereinander ins Dach eines Rittal Schranks eingebaut. Die Lüfter befinden sich zwischen den beiden Radiatoren. Dabei werkeln dann 3 Papst Lüfter mit 230V/13 W, die thermostatgesteuert ein- aus- geschaltet werden und zusätzlich 6 PWM Lüfter von Papst mit je 6 W, die temperatugeregelt sind. Das reicht dann für die Kühlung von 16 Rechnern mit i7 3770K. Also 16 echte und 16 virtuelle Kerne für BOINC. Ich wünsche mir seitliche Besfestigungsmöglichkeiten.