Phobya quick release connector kit 13/10mm bulkhead

  • 65031
  • 4049469047153
  • 0,15 kg

Leverbaar in: in 7 - 8 weken

€ 12,00 *

Prijzen incl. btw excl. verzendkosten

Techmische details en video's meer
Technische details
1e pagina: 13/10mm (ID 3/8" OD 1/2")
2e pagina: 13/10mm (ID 3/8" OD 1/2")
Compatibiliteit: weiche Schläuche (PVC, Silikon, Neoprene)
Draaibaar: nee
Kleur: zilver nickel
Lengte schroefdraad: niet gespecificeerd
Manufacturer: Phobya
Materiaal: Messing
Specificatie: Serie Phobya
Videos
Quick release couplings are usually derived from the pneumatics market. Due...meer
Productinformatie

Quick release couplings are usually derived from the pneumatics market. Due to this origin the seal of the couplings is often ensured by high air pressures. if such couplings which were designed for high air pressures are used in the watercooling sector with its low pressure it has happened in the past that leakages were the consequence. Phobya has addressed this issue and has designed a quick release coupling especially for watercooling applications. Therefore Phobya can now guarantee a perfect seal when the couplings are used in a watercooling system. As they were specially designed these couplings can not be used with air pressure but only with low-pressure water applications.
The Phobya quick coupling kit is self-sealing, meaning that the coupling can be separated without leakage even when the loop is filled. Both sides seal safely when separated, at most 1 to 2 drops can spill out (therefore not 100% leakage-free). These quick release couplings are ideal for external radiators as they allow quick and safe separation for transport. if you wish to make an external radiator easily separable you require two of these kits (1 to the radiator, 1 from the radiator).
This kit is designed as a bulkhead fitting, meaning that the female connector can easily be attached to the case.

Technical details:
Screw-on fitting for 13/10mm hoses (13mm outer- 10mm inner diameter)
Material: Silver nickel coated brass
M16 bulkhead thread
Only for low-pressure (max. 6 bar) water applications- not suitable for air pressure applications

Extent of delivery:
1x Female coupling
1x Male connector
2x Union nut
1x Counter nut

Please Note: The female connector's safety slide must be pulled back completely to ensure a tight seal when separated.

 

Awards
Questions & Answers more
Questions & Answers
Frage von Guest #212377 vom 09. September 2016
Hatte zwei dieser verschlüsse eingebaut. die waren für c. zwei minuten dicht,, dann tropfte das wasser. Habe später einen neuen versuch gestartet als entlüftungsfventil oben am deckel radiator. Zum glück ragte der schlauch mit dem schottverschluss ca. fünf cm über den höchsten punkt des radiators heraus, ansonsten wäre mein 6000 eur PC schrott.Diese verschlüsse werden undicht und sind nicht zu empfehlen...
Antwort von Administrator vom 09. September 2016
Bitte melden Sie sich dazu bitte bei unserer RMA über ein Service TIcket, da wird Ihnen dann weitergeholfen: http://www.aquatuning.de/AtsdRma/guest

Do you have a question?

Hinweis: Ihre Frage wird öffentlich einsehbar sein und kann - neben unserem Support - auch durch ein Mitglied unserer community beantwortet werden. Sie können Ihren öffentlich sichtbaren Namen und Ihre Email Benachrichtigungen in Ihrem Kundenkonto konfigurieren.
Lees, schrijf en bediscussieer reviews...meer
Beoordelingen
5 Sterne:
(0)
4 Sterne:
(1)
3 Sterne:
(0)
2 Sterne:
(0)
1 Sterne:
(0)
27 mrt. 2013

Funktioniert super, wenn man Externen Radiator hat... Kann man schnell abstecken und Fertig

Bundle

Bundle