 |
Klanten online:
18
Producten in onze Shop:
6586
Producten uit voorraad leverbaar:
1088030
|
|
|
Innovatek XX-Flow rev2.0 transparent (zonder bevestigingsklem)
|
Art.rr.: 10012
|
|
|
|
Foto's
Bericht
Aanbevelen
Meer opties
|
Manufacturers ID: 500910-01
Informatie
| . |
Product description: |
| |
The new, highly optimized flow guidance of the innovatek XX-Flow rev.2.0 (Double X) achieves extreme levels of cooling performance. The block has a compact size and an outstanding level of craftsmanship. The base is made out of purest, nickel plated copper, the composite enclosure out of high grade special plastic with a tank frame. As an optical highlight, the block comes with a blue-colored composite enclosure.
The innovatek XX-Flow rev.2.0 is a consequent improvement of the proven X-Flow architecture. The flow guidance was optimized to the physical limits and so achieves new performance levels. Still the block has a compact size and a low weight. The special shell, made out of tough special plastic, creates an even better turbulence of the cooling liquid in combination with the special base without lowering the cross-section. The innovatek XX-Flow CPU water block therefore doesn't have any special requirements regarding the pump or the cooling loop. Furthermore, the flow is maintained in any case as the block can't clog.
The special (and patented) innovatek crossflow technology was optimized to the limit on the XX-flow block. As the name indicates, the cross-principle was nearly doubled and thus the efficiency was furtherly improved. In contradiction to the X-Flow this is why the turbulence can't be seen anymore on the outlet of the block.
This special interior design doesn't need any moving parts and uses the thermal capacity of the cooling liquid in an optimal way to allow extreme cooling performance. Still the cross-section isn't reduced and so the flow isn't restricted in any way. The pump doesn't have to work harder due to this and the block can't clog.
The combination of the special plastic and the nickel plated copper is an optimum basis for a high level of security against corrosion. Of course, the base of the block is made with a very high quality and very flat to ensure a good contact to the cpu. The special coating of the base, being only a few thousands of a millimeter thick, gives the block an even better base and so improves heat transfer even more.
The block comes with 8/10mm compression fittings by default (G 1/4" thread). They fit any 8/10mm (8mm inside, 10mm outside) tubing (PVC, PU, etc.)
|
| . |
Technical data: |
| . |
Length: |
. |
app. 64 mm |
| . |
Width: |
. |
app. 64 mm |
| . |
Height: |
. |
app. 20 mm |
| . |
Weight: |
. |
app. 305 Gramm |
| . |
Material: |
. |
Copper |
This product will be shipped, unless otherwise specified, without a printed manual. For questions regarding the installation of the product, please contact our support.
|
|
