Custom-built case with watercooling system from Aquatuning. This Ready2Go system is fully installed and ready for operation. Every single component is chosen to suit the highest quality standards and is installed and tested by us at Aquatuning. All systems are shipped filled and ready for use.
You only have to install the waterblock(s) on your components and you are ready to enter the world of watercooling. The CPU waterblock is compatible with sockets 775/1156/1366/AM2/AM3/939 which may be changed if you wish.

The very quiet and powerful pump runs at 12V and can be connected via a 4-Pin Molex power connector (like a HDD). Hence the pump is starting up and shutting off automatically with the PC.

This system is freely expandable by e.g. a Mainboard or GPU waterblock. If you wish we can also install further components into the loop for a small fee. (Art.No. 43005).
We have the following guidelines for system recommendations:

1 x 120mm radiator: CPU (overclocked) or CPU (not overclocked) + Mainboard (NB, SB, Reg)
2 x 120mm radiator: CPU (overclocked) + Mainboard (NB, SB, Reg) + 1 x GPU
3 x 120mm radiator: CPU (overclocked) + Mainboard (NB, SB, Reg) + 2 x GPU (SLI)

The Phoya Xtreme 200 has a cooling performance between the performance of a 2x120mm and 3x120mm radiator. Optionally an additional 120mm radiator may be installed in this case.

This Ready2Go system contains the following components:
Case: Cooler Master HAF932 KKN1-GP
CPU waterblock: EK Water Blocks EK-Supreme HF Acetal universal (775/1156/1366/AM2/AM3/939/XEON)
Radiator: Phobya Xtreme 200  
Pump: Laing DDC-Pumpe 12V DDC-1T incl. Laing DDC Plexi top
Pump decoupling: Phobya Noise Destructor V.1 for pump decoupling
Reservoir: Aquacomputer aquabox professional 5 1/4" black G1/4
Fillport: Fillport black nickel universal
Tubing: Masterkleer tubing PVC 13/10mm (3/8"ID) UV-reactive dark red 3m
Fans: Cooler Master HAF932 fan
Fittings: 13/10mm (10x1,5mm) compression fittings G1/4 - compact - black nickel
Fan controller: Scythe Kaze Master Ace 5,25" - black

The items in this system are assembled considering colour and design. The colours in this are black and red. A Fillport makes filling much easier and the fan controller brings even more silence to the system!

All components of the Ready2Go system are fully installed. If modifications of the case are required (e.g. machining of the radiator opening) we cannot guarantee that no machining traces are on the case. All Ready2Go systems are checked by our quality control department before being shipped.

Please note:
If you wish to have other components than listed installed into the case please contact us via Email or telephone, we will prepare an individual offer four you as soon as possible. if a case of our portfolio cannot be found as aready2Go system please feel free to contact us as well via telephone or Email.